drawing number rev 1501 route 34 south farmingdale, nj 07727 title material fscm finish: 83330 this drawing and the contents herein are confidential and the sole property of dialight. reproduction of this drawing or construction of any parts within this drawing are forbidden without the written consent of dialight. .118 [ 3 ] .091 [ 2,3 ] .063 [ 1,6 ] .051 [ 1,3 ] .020 [ 0,5 ] .063 [ 1,6 ] .067 [ 1,7 ] .079 [ 2 ] typ. .063 # .002 1,6 # 0,05 [ ] .059 # .002 1,5 # 0,05 [ ] typ. .057 # .002 1,45 # 0,05 [ ] typ. .134 # .008 3,4 # 0,2 [ ] typ. .157 # .004 4 # 0,1 [ ] typ. .079 # .002 2 # 0,05 [ ] .315 # .008 8 # 0,2 [ ] .137 # .002 3,48 # 0,05 [ ] .069 # .004 1,75 # 0,1 [ ] -.020 .000 -0,49 0,01 [ ] .216 # .008 [5,5 # 0,2] dialight part number packaging led color 597-3002-502f sample strip allngap red (630 nm) 597-3002-507f 7" reel 597-3032-502f sample strip allngap red (620 nm) 597-3032-507f 7" reel 597-3202-502f sample strip allngap orange 597-3202-507f 7" reel 597-3402-502f sample strip allngap yellow 597-3402-507f 7" reel 597-3502-502f sample strip allngap yellow green 597-3502-507f 7" reel 597-3312-502F sample strip allngap green (560 nm) 597-3312-507f 7" reel 597-3322-502f sample strip ingan green (525 nm) 597-3322-507f 7" reel 597-3602-502f sample strip ingan blue 597-3602-507f 7" reel 597-3902-502f sample strip ingan white 597-3902-507f 7" reel operating characteristics at 25 $ c ambient led color luminous intensity @i f = 20 ma (mcd) forward voltage @i f = 20 ma (v) reverse current ( a) dominant wavelength (nm) peak wavelength (nm) viewing angle (deg) min typ max typ max max min typ max typ typ allngap red (630 nm) 25 63 160 2.2 2.7 10 625 630 635 630 110 allngap red (620 nm) 40 100 250 2.2 2.7 10 615 620 625 620 110 allngap orange 63 160 400 2.2 2.7 10 602 605 608 605 110 allngap yellow 63 160 400 2.2 2.7 10 587 590 593 590 110 allngap yellow green 10 25 63 2.2 2.7 10 569 572 575 572 110 green (560 nm) 9 18 36 2.1 2.5 10 558 560 564 565 110 ingan green (525 nm) 56 140 360 3.2 4.0 100 520 525 535 523 110 ingan blue 36 100 3.3 4.2 100 465 470 475 468 110 ingan white 360 900 3.2 4.3 100 *x=0.3; y=0.3 110 absolute maximum ratings at 25 $ c ambient led color units allngap red (630 nm) allngap red (620 nm) allngap orange allngap yellow allngap y/g green (560 nm) ingan green (525 nm) ingan blue ingan white power dissipation 54 54 54 54 54 62 84 84 84 mw continuous forward current 20 20 20 20 20 25 20 20 20 ma peak forward current (1/10 duty cycle, 0.1ms pulse width) 100 100 100 100 100 60 100 100 100 ma linear derating 0.26 (from 40 $ c) 0.50 (from 70 $ c) 0.40 (from 60 $ c) ma/ $ c reverse voltage 5 v storage temperature -40 to +100 $ c operating temperature -40 to +85 -40 to +100 -30 to +85 $ c tolerances: unless otherwise specified fractions: # 1/64 decimals (.xx): # .02 decimals (.xxx): # .008 angles: # 1 $ scale: 30.000 all dim's in: inches (mm) c-17866 a 1208 chip led with reflector rohs compliant - - sheet 1 of 1 family table: rev ecn no revisions drn ckd app date a new release ajf klj no 9-22-10 rohs compliant 597-3xx2-50xf part numbers with the "f" suffix ending are rohs compliant. for example: 597-3002-502f reel and bag packaging are marked with "rohs compliant" label or equivalent markings. these parts can be used with rohs reflow profile. parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260c temp. for 5 sec. max 250 $ c, within 10sec 140~180 $ c time temperature recommended rohs solder profile 150.0 200.0 100.0 250.0 300.0 0.0 $ c 50.0 210~250 $ c 1min minimum 40sec max notes: 1. epoxy color: water clear. 2. moisture sensitivity level: 3. 3. tape & reel as per eia standard 481-1-a; cathode towards sprocket. 4. tape & reel may require re-taping after 12 months. 5. pin numbers are for reference only, designation non-existent on part. 6. dialight part numbers: 597-3xx2-50xf. 7. ...-502f suffix means parts packaged on a 20 pcs sample strip. ...-507f suffix means parts packaged on a 7" [ 180mm] reel, 2,500 pcs/reel. 8. packaging to include label containing dialight part number, date code/lot no., luminous intensity and color bins, qty/reel, and country of origin. 9. this assembly contains electrostatic discharge sensitive devices (esds). maintain all precautionary measures during assembly, handling and storage in accordance with ipc-a-610. *chromaticity coordinates (typ) cathode mark led die pin 1 pin 2 recommended pad layout scale 4.000 user feed direction tape & reel configuration cathode mark attention: observe precautions for handling electrostatic sensitive devices led schematic pin 1 cathode pin 2
|
